When using handheld electric strapping tool , please be sure to observe the following safety precautions to use in order to avoid any possible dangers. Please read before using this manual.
1, the working environment:
※ Do not hand-held electric balers exposed to rain or dust environment, do not use the machine in damp areas.
※ Do not close to combustibles and explosives in the region.
※ maintain the work area clean and tidy, messy work environment easily lead to injuries.
2, Note:
※ proper use of the T320 portable electric balers, please use the manual instructions in accordance with this the proper use of machinery, not to exceed the applicable working conditions.
※ Use of this manual recommended spare parts, use of non-manual parts of this could lead to mechanical damage or the risk of injuries and loss of product warranty rights.
※ the use of mobile electric balers, please keep a safe distance with the strapping tape, strapping tape loose from the direction in order to avoid strapping tape may rebound bodily harm to users and the surrounding.
※ operator hand-held electric balers, the user stops, keep stable and unstable standing, do not operate the machine.
※ remain vigilant, keep a close watch status of the operation, when the fatigue unable to concentrate, please suspend the operation.
※ Do not close with buttons and no reason to start a long time idling motors, so as to avoid damage to electrical systems and institutional components.
3, strapping tape:
※ All in this manual use the recommended specifications, strapping tape, poor quality or do not meet the proposed specifications strapping tape strapping effect will lead to lower or tighten when the sliding zone.
4, the use of safety brace
※ operation, users are wearing safety goggles and ear protectors to protect the eyes and ears. Not wearing protective gear to conduct operations may result in injury to the eyes or ears.
5, adhesive surface Inspection
※ examination after the completion of bonding adhesive surface, according to the manual bonding time to adjust to achieve optimal bonding results. If the bonding face serious adverse, please re-strapping, in order to ensure cargo safety.
6. tightening Note
※ When the power of more than tighten their tensile strength strapping tape, the strapping tape will be broken and may rebound in physical harm to users and the surrounding persons or cause the collapse of the goods. Make sure before use strapping tape used in the fracture strength, Do not tighten too much power to adjust in order to avoid danger.
※ the event of sharp edges of the strapping material, tie strength is too high, the sharp edge part of the strapping material fracture easily lead to dangerous, it is recommended to increase gradually tighten force, the use of sharp edges to protect part of the Corner, in order to avoid risk of fracture .
7, battery recycling and Safety Precautions
※ can not be arbitrarily discarded the battery in the garbage, water or fire, to facilitate environmental protection and to avoid danger.
※ In order to avoid short-circuit the battery can not be stored together with metal objects, nor in any way turn the battery positive and negative. Do not open the battery cover portable electric balers, always keep dry.
※ T320 portable electric balers, if the long-term disabled, please remove the battery to extend battery life.
※ portable electric balers when not in use, please remove the battery, so as to avoid rapid loss of electric power, rechargeable battery eat about 1-2 months later, the power will be completely natural wastage. To extend battery life, please remove the battery the machine will be loaded onto the remaining power is used up, and confirm the battery power runs out (red light flashing), Zaiqu charge.
※ When the battery does not charge saturation, they brought the use of, or power not fully used up, then Naqu charging incorrect usage will shorten battery life.
※ Only use original 2280 or 2280Cd batteries are used in T320 and T321 machines, 2280, or 2280Cd battery charger only applies to BOSCH Battery Adapter AL30DV1450 and 2684 Block. Use of non-specified in this manual charger may lead to electric shock, the risk of battery overheating or leakage.
8, Chargers safety precautions
※ Please read and follow the manual to use the attached charger charger, and to determine its safety precautions in accordance with the requirements in order to avoid danger
※ batteries and battery switch connector blocks to ensure that clean and dry before they can insert the charger.
9. Maintenance
※ Note that the maintenance of portable electrical packer to keep the machine clean, pay attention to maintaining a sharp knife cut will help the normal operation of the machine and proper rate. Please use the Manual in accordance with these instructions the machine maintenance and replacement of original spare parts, if any damage should be referred to authorized dealer for maintenance, do not try to dismantle their own repairs, replace them will lose their own rights and interests of warranty.
※ Check damaged parts prior to use if there is any component is damaged, they should carefully check to determine whether the normal operation and check the working environment of all the objects that may affect the machine operation.
※ dangers and facelift of machine parts working before, be sure to remove the battery from the machine.
※ When the machine is damaged, do not re-use, do not modified the machine.
10.storage
※ do not use hand-held electric balers should be stored in safe and clean dry place, should stay away from places where children can be obtained