First unplug the power plug, and then follow these steps to replace
1. (3 / 16 "or 5mm )screwdriver remove the screw on the cutting knives cover (a).
2. According to the arrows,press and push then remove the cutting knives cover.
3. Hold and press the adhesive to mention the button, so that bonding head and cutting knives under the bottom out slowly. (To avoid parts damage, do not make bond head and the cutting knives vigorously down)
4. (3 / 16 "or 5mm ) cross-type screwdriver remove the screw on the cutting knives, light Pilates for putting blades do not touch the floor and to hand-held electric baler needle nose pliers to remove the cutting knives.
5. the portable electric cutting knives into the new balers in a new anti-knife block off the screw tightened the new blade. (Due to no longer anti-slip effect, not to use the old drop-resistant screws.)
6. cutting knives will be loaded back to cover after the screws (a) the lock back to fixed, taking care to avoid too tight a lock knife seat cover led to rupture.
7. filed mention will be bonded to the first homing.
Note: 1. even after the hand-held electric packer blade for cutting knives sure to install back cover, otherwise, may result in injuries to the operator, if other questions, please consult with your dealer.
2. cutting knives, strap pulley, tooth plate, fuses are expendable and non-in warranty range.